Components of the product/spares/accessories
15.2 Accessories
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
393
M12 – Ethernet cable M12/RJ-45
This cable connects the reader with a communications partner over Ethernet.
Due to its short length, the following cable is intended only for commissioning and service:
Order number Ethernet cable Note
6XV1871-5TH20 Ethernet cable M12/RJ45 2 m
• Fitted with M12 plug, 8-pin
and RJ-45 plug
• Length: 2 m
Suitable for all SIMATIC MV400
readers.
Other 6XV1871-5... cables can
be found in the new catalog,
ID10 ● 2013 and the Industry
Mall.
The following industrial cables are used for fixed installation:
Order number Length of Ethernet cable
M12/M12-180
Note
6XV1870-8AE30 0.3 m
6XV1870-8AE50 0.5 m
6XV1870-8AH10 1.0 m
6XV1870-8AH15 1.5 m
6XV1870-8AH20 2.0 m
6XV1870-8AH30 3.0 m
6XV1870-8AH50 5.0 m
6XV1870-8AN10 10 m
6XV1870-8AN15 15 m
• Prefitted IE FC TP trailing
cable GP 2 x 2 (PROFINET
type C) with two 4-pin M12
plugs (D-coded)
• Degree of protection IP65/67
Special lengths with cable outlet
Note
Special lengths with 90° or 180° cable outlet
You can order special lengths with a 90° or 180° cable outlet angle, at:
(http://support.automation.siemens.
com/WW/view/en/26999294)
To Next Page
Loading...
