Components of the product/spares/accessories
15.2 Accessories
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
395
M16 power cable / power I/O cable / power I/O RS232 cable
These cables are used for the camera voltage supply. The power I/O RS232 cable also has
wires for connecting digital inputs/outputs and the RS-232 serial port.
Order number Cables Note
6GF3400-0BH15 1.5 m MV400 push-pull power
cable
• M16 with connector prefitted
at one end
• Prefitted push-pull
• For power supply only, no
I/O, no RS 232
• Length: 1.5 m
Suitable for all SIMATIC MV400
readers
6GF3400-1BH20 2 m MV400 push-pull power
cablex
• M16 with connector prefitted
at one end
• Open end
• Push-pull connectors
supplied
• For power supply only, no
I/O, no RS232
• Length: 2 m
Suitable for all SIMATIC MV400
readers
6GF3440-8BA2 SIMATIC MV440/
SIMATIC MV420 power IO RS-
232 cable
• M16 with connector prefitted
at one end
• Open end
• Length: 10 m
• Lines for I/O and RS232
Suitable for all SIMATIC MV400
readers
To Next Page
Loading...
