Image processing
4.2 Code verification
SIMATIC MV420 / SIMATIC MV440
66 Operating Instructions, 04/2013, A5E02371045-06
Field name Value
Maximum reflectance 0000 ... 0100
Minimum X dimension 0000 ... 0999
Maximum X dimension 0000 ... 0999
Avg. gray scale value 0000 ... 0255
Calibrated exposure time 0000 ... 9999
Calibrated brightness 0000 ... 0999
Light source Name of the lamp
Wavelength 0000 ... 9999
List of characteristics Abbreviation:P[GFP][GFP][GFP]G
List of characteristics
Note
Verification according to AIM-DPM-1-2006
The standard-compliant verification according to AIM-DPM-1-2006 works with automatic
exposure control. The value output for "Exposure time" in the verification settings therefore
differs from the value of the "calibrated exposure time" and corresponds to the value
selected by the exposure control.
The characteristics list consists of the abbreviation for a quality parameter followed by five
letters. The five letters represent the quality evaluation ([G]ood, [F]air, [P]oor) associated
with the possible grades 0, 1, 2, 3, 4 or F, D, C, B, A (in each case, in this order).
For Siemens DPM, the characteristics list contains 10 entries since all the quality
characteristics can be configured individually here. For all other standards, only the overall
grade is output whose evaluation is relevant for all grades.
To Next Page
Loading...
