Procedure
1. Select the menu command Start > Settings > Network Settings.
2. In the "LAN or High-speed Internet" group, select the network connection through which
you want to establish a connection to the SIMATIC PCS 7 AS mEC RTX
3. .
4. Select the menu command File > Properties.
The "Local Area Connection Properties..." dialog box opens.
5. In the list "This connection uses the following items:" select the entry "Internet Protocol TCP/
IP".
6. Click "Properties".
The "Internet Protocol (TCP/IP) Properties" dialog box opens.
7. Open the "General" tab.
8. Enter the settings for the network connection.
9. Click "OK".
The "Internet Protocol (TCP/IP) Properties" dialog box closes.
10.Click "OK".
11.Click "OK".
The "Local Area Connection Properties" dialog box closes.
Adapting the network settings of the engineering station to the settings of the plant
When the settings on the remote PC station have been changed, set the original network
configuration (plant-specific settings) on the engineering station.
Commissioning and configuring SIMATIC PCS 7 AS mEC RTX
9.5 How to change the network settings for a remote desktop connection on a PC
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC 101