Procedure
1. In the left window of the component view, open the shortcut menu of the SIMATIC PC
station and select the menu command Rename.
2. Enter a name for the specific project.
Recommendation: Use the name of the PC under Start > Settings > Control Panel >
System > "Computer Name" tab > "Computer name".
3. Click "OK".
Additional information
● Online help for the PCS 7 Wizard
7.5.5 How to edit the hardware configuration of the PC stations on the engineering
station
Introduction
Once you have created the BOX PC in the SIMATIC Manager, you may add additional
components in HW Config. Compare the configuration required for the BOX PC with the tables
in section " Requirements for loading the BOX PC (Page 46) ".
Requirements
● The ES has been inserted in your PCS 7 project.
● The PCS 7 project is displayed in the component view in SIMATIC Manager.
Procedure
1. In the component view, select the SIMATIC PC station (SIMATIC PCS 7 BOX) which
contains the CPU.
2. Double-click the "Configuration" object in the detail window.
HW Config opens.
3. If the hardware catalog is not visible, select the menu command View > Catalog.
4. Switch to the hardware catalog.
5. Drag and drop the missing components to the respective slots in the station window.
6. Click "OK".
7. Save and compile your changes.
8. In the component view, select the SIMATIC PC station that represents the ES.
9. Double-click the "Configuration" object in the detail window.
HW Config opens.
Commissioning and configuration of SIMATIC PCS 7 BOX RTX
7.5 Configuring SIMATIC PCS 7 BOX RTX in the PCS 7 network
BOX (V8.1)
76 Function Manual, 03/2015, A5E32711362-AC
To Next Page
Loading...
Need help?
General
