Siemens SIMATIC PCS 7 BOX Function Manual

Procedure
1. In the left window of the component view, open the shortcut menu of the SIMATIC PC
station and select the menu command Rename.
2. Enter a name for the specific project.
Recommendation: Use the name of the PC under Start > Settings > Control Panel >
System > "Computer Name" tab > "Computer name".
3. Click "OK".
Additional information
● Online help for the PCS 7 Wizard
7.4.5 How to expand your PCS 7 project to include an engineering station
Introduction
Once you have created the project with the BOX PC using the PCS 7 wizard, create the PC
station for the engineering station in the project.
Requirements
● The project with the BOX PC is created.
● The PCS 7 project is displayed in the component view in SIMATIC Manager.
Procedure
1. Select the project folder in the tree view.
2. Select the shortcut menu command Insert New Object > SIMATIC PC Station.
3. Select the newly inserted SIMATIC PC station in the tree view.
4. Select the shortcut menu command Rename.
5. Enter a descriptive name.
Recommendation: Select the name of the PC under Start > Settings > Control Panel >
System > "Computer Name" tab> "Computer name".
6. Click "OK".
Commissioning and configuration of SIMATIC PCS 7 BOX RTX
7.4 Configuring SIMATIC PCS 7 BOX RTX with external engineering
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC 61

Siemens SIMATIC PCS 7 BOX Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 BOX
Category	Industrial PC
Language	English