● You can find approved network adapters in the Catalog Overview
Process Control System
PCS 7; Released Modules
● You can find information on fault-tolerant automation systems in the function manual
Process Control System PCS 7; Fault-Tolerant Process Control Systems
.
● You will find information about time synchronization in the
Process Control System PCS 7;
Time Synchronization
function manual.
6.3 Configurations with SIMATIC PCS 7 BOX RTX
6.3.1 Configuration options
Configuration options
The following configurations are possible with SIMATIC PCS 7 BOX RTX based on the product
bundles available for order:
● Bundle: SIMATIC PCS 7 BOX RTX as SIMATIC PCS 7 complete system with AS, ES and
OS functionality:
– SIMATIC PCS 7 BOX as a single-station system (Page 35) with AS/ES/OS
● Bundle: SIMATIC PCS 7 BOX RTX as SIMATIC PCS 7 runtime system with AS and OS
functionality:
– SIMATIC PCS 7 BOX as AS/OS with external engineering (Page 36)
– SIMATIC PCS 7 BOX as AS/OS in a PCS 7 network (Page 38)
Note
The configuration options apply to an OS single-station system.
SIMATIC PCS 7 BOX RTX cannot be used as an OS client or OS server.
Expanded functions with additional software packages
You can install additional software packages from the "
Process Control System; SIMATIC PCS
7
" DVD.
You need the corresponding license key to use these software packages. You can find
additional information on this in the manual
Process Control System PCS 7; PCS 7 - PC
Configuration
.
Additional information
● Manual
Process Control System PCS 7; PCS 7 - PC Configuration
Structure of SIMATIC PCS 7 BOX RTX
6.3 Configurations with SIMATIC PCS 7 BOX RTX
BOX (V8.1)
34 Function Manual, 03/2015, A5E32711362-AC
To Next Page
Loading...
