Requirement
● SIMATIC PCS 7 is installed.
Procedure
1. Select the menu command Start > SIMATIC > SIMATIC NET > Set PC Station.
The "'Set PC Station' Configuration Console" dialog box opens.
2. In the tree view, select the folder "PC Station > SIMATIC NET Configuration > Access
Points".
3. Select the object "S7ONLINE" in the detail window.
4. Select the menu command Action > Properties.
The "S7ONLINE" dialog box opens.
5. Select the "S7ONLINE (STEP 7)" entry from the "Assigned interface parameter
assignment" drop-down list:
6. Select the entry "PC internal (local)" for downloading the configuration and the program to
the CPU.
7. Click "OK".
Additional information
● Online help on the dialog boxes
7.3.6 How to configure the SIMATIC PCS 7 BOX RTX
Requirement
● Perform configuration directly on the BOX PC.
● The following software is installed on the SIMATIC PCS 7 BOX RTX:
– Operating system
– PCS 7
– Software package WinAC RTX
Setting the components on the SIMATIC PCS 7 BOX RTX
1. When the CPU is in RUN mode, select the CPU > STOP menu command in the operator
panel of the CPU on the SIMATIC PCS 7 BOX RTX .
The user program running on the CPU is stopped.
2. Select the menu command Start > Station Configuration Editor on the SIMATIC PCS 7
BOX RTX .
Commissioning and configuration of SIMATIC PCS 7 BOX RTX
7.3 Configuring SIMATIC PCS 7 BOX RTX for a single-station system
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC 51
To Next Page
Loading...
Need help?
General
