Siemens SIMATIC PCS 7 BOX - Connection Options for SIMATIC PCS 7 BOX

Structure of SIMATIC PCS 7 BOX RTX
6
6.1 Introduction
Introduction
The following sections contain the configuration options and general information on the
configuration of SIMATIC PCS 7 BOX RTX.
The characteristics of the process control system correspond to the standard of SIMATIC
PCS 7. The characteristics of the CPU correspond to the controller used.
Overview
The following topics are discussed in the sections below:
● Hardware and software components of SIMATIC PCS 7 BOX RTX
● Configurations with SIMATIC PCS 7 BOX RTX
● Connection options for SIMATIC PCS 7 BOX RTX
● Operator panel of the CPU
Ordering information
● The order information is listed in the
ST PCS 7 catalog.
Additional information
● Section "Functional compatibility with SIMATIC PCS 7 (Page 32)"
● Configuration manual Process Control System PCS 7; Engineering System
● Configuration manual Process Control System PCS 7; Operator Station
● Manual SIMATIC; Windows Automation Center RTX; WinAC RTX 2010
● Manual SIMATIC; The Process Device Manager
● Manual SIMATIC; Automation License Manager
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC 27