Siemens SIMATIC PCS 7 BOX - Connecting to PROFINET; Operator Panel of the CPU

8.3.2 Connecting to PROFINET
Introduction
The internal interfaces of the SIMATIC PCS 7 AS mEC RTX are Ethernet interfaces.
If you want to connect distributed I/Os at the SIMATIC PCS 7 AS mEC RTX by means of
PROFINET, you can do so at the integrated PN/IO interface.
Additional information
Compatibility to SIMATIC PCS 7 (Page 90)
8.4 Operator Panel of the CPU
8.4.1 Operator panel of the CPU
Operator panel of the CPU
The operator control and display elements of the CPU can be displayed symbolically on a
monitor in the form of an operator panel.
The operator panel can also be controlled via a remote desktop connection.
Installation of SIMATIC PCS 7 AS mEC RTX
8.4 Operator Panel of the CPU
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC 93