Motor components and options
4.2 Options
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
101
The overview shows the following secondary section end piece versions:
● Combi distributor:
– Standard solution for using secondary section end pieces
– Available for all sizes
– Fixes the secondary section cover (strip) at the beginning and end of the secondary
section track
– Implements the connection and parallel branching of the coolant to two
(1FN3050…450) or three (1FN3600…900) cooling sections at the beginning of the
secondary section track.
– Combines the coolant flow and connects the coolant discharge at the end of the
secondary section track.
● Combination adapter/combination end piece:
– Available for 1FN3050…1FN3450 sizes
– Fixes the secondary section cover (strip) at the beginning and end of the secondary
section track
– Implements the coolant connection and coolant routing: The connections for the
coolant intake and return are provided on the combination adapter. The combination
end pieces are required to route the coolant at the other end of the secondary section
track.
● Cover end piece:
– Available for 1FN3050…1FN3450 sizes
– Fixes the secondary section cover (strip) at the beginning and end of the secondary
section track
To Next Page
Loading...
Need help?
General