Fundamental safety instructions
1.3 Industrial security
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
19
Note
Industrial security
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it
is
– and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens
’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to the
ir plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the Internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewal
ls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit:
http://www.siemens.com/industrialsecurity)
’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product v
ersions that are no
longer supported, and failure to apply the latest updates may increase customer
’s exposure
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed at:
http://www.siemens.com/industrialsecurity)
Further information is provided on the Internet:
Industrial Security Configuration Manual
(https://support.industry.siemens.com/cs/ww/en/view/108862708)
To Next Page
Loading...
