Configuration
5.2 Configuring workflow
1FN3 linear motors
104 Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
● Comments on system reactions
● Installation information of the drive and control components
● Energy considerations of the configured drive systems
You can find additional information that you can download in the Internet at SIZER
(https://support.industry.siemens.com/cs/document/54992004/sizer-for-siemens-
drives?dti=0&pnid=13434&lc=en-WW).
STARTER drive/commissioning software
The STARTER commissioning tool offers
● Commissioning
● Optimization
● Diagnostics
Table 5- 1 Article number for STARTER
STARTER
German, English, French, Italian, Spanish
6SL3072-0AA00-0AG0
Configuring workflow
Requirements
The selection of a suitable linear motor depends on:
● the peak force, effective force of the duty cycle and static force required for the
application
● the desired velocity and acceleration
● the installation space available
● the desired or possible drive arrangement (e.g. single-sided, parallel, or double-sided
arrangement)
● the required cooling system
To Next Page
Loading...
