Siemens SIMOTICS L-1FN3 - Preparations for use

Description of the motor
2.5 Selection and ordering data
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
47
2.5.1.5
Ordering examples
Ordering example of a peak or continuous load motor
If you have any questions on configuring, contact your local Siemens office.
Table 2- 10
Peak load motor
Continuous load motor
Component
Quantity
Article No.
Article No.
Primary section 1 1FN3150–3WC00–0BA1 1FN3150–3NC70–0BA1
Primary section precision cooler
1
1FN3150–3PK00–0AA0
1FN3150–3PK10–0AA0
Secondary sections
(length of the secondary section
track: 1,440 mm)
12 1FN3150–4SA00–0AA0
Secondary section cover (metal
band)
1 1FN3150–0TB00–1BC0
Heatsink profiles with plug-type
coupling
2 1FN3002–0TK04–1BC0
Combi distributor
2
1FN3150–0TJ01–0AA0
Hall sensor box
(standard, straight cable outlet)
1 1FN3005–0PH00–0AA0
Ordering examples of heatsink profiles
In the following ordering examples, the article numbers of the heatsink profile in question is
provided directly in the drawings. If you have any questions on heatsink profiles, contact your
local Siemens office.
Ordering examples of heatsink profiles with a plug-type coupling and for connection to a
combi distributor with a plug-type coupling are shown below. The relevant article numbers for
the secondary section end pieces with combi distributors are also shown in the drawings,
e.g. 1FN3050-0TJ01-0AA0.
Figure 2-3 Heatsink profiles for secondary section track sizes 1FN3050-4SA00-0AA0,
1FN3100-4SA00-0AA01, 1FN3150-4SA00-0AA0