Siemens SIMOTICS L-1FN3 - Environmental Compatibility; Environmental Compatibility During Production; Disposal; A.3 Environmental Compatibility

Appendix
A.3 Environmental compatibility
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
589
Temp-F
Circuit for monitoring the temperature the motor winding
Temp-S
Temperature monitoring circuit for switching off the drive at overtemperature
TM
Terminal Module
VDE
Association of Electrical Engineering, Electronics and Information Technology
(in Germany)
WMS
Position measuring system; incl.
WMS: incremental position measuring system;
abs.
WMS: absolute position measuring system
A.3
Environmental compatibility
A.3.1
Environmental compatibility during production
● The packaging material is made primarily from cardboard.
● Energy consumption during production was optimized.
● Production has low emission levels.
A.3.2
Disposal
Recycling and disposal
For environmentally-friendly recycling and disposal of your old device, please contact a
company certified for the disposal of waste electrical and electronic equipment, and dispose
of the old device as prescribed in the respective country of use.