Configuration
5.4 Mounting
1FN3 linear motors
148 Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
2. Place the primary section with a forcing assembly on the secondary section track as
follows.
Danger of crushing when mounting the primary section on the secondary section!
When you are placing the primary section on the secondary section, there is a risk of
crushing due to the high forces of attraction.
• Never place the primary section directly onto the secondary section.
• Always place a distance foil manufactured out of non magnetizable material between
the primary section and secondary section.
Figure 5-22 Forcing assembly
To Next Page
Loading...
