Description of the motor
2.1 Highlights and benefits
1FN3 linear motors
Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
25
● Modular design: The motor can therefore be configured to optimally match the technical
requirements. The modularity of the motor is explained in Chapter "Motor components
and options (Page 83)".
● The motor is thermally decoupled from the machine using a primary section precision
cooler and secondary section cooling, based on the Thermo-Sandwich
®
principle.
● Simple coolant connection.
● The secondary section track can be fully covered: This provides a smooth surface and
prevents unwanted particle deposits, especially in the gaps between the secondary
sections.
● Simple electrical connection via an integrated terminal panel or permanent cable
connections.
Additional feature on the peak load motor
● Low mass and high overload capability: The motor is ideally suited for acceleration drive
applications.
Additional features on the continuous load motor
● Low mass and high continuous load capability. The motor is ideally suited to load cycles
with continuous acceleration and braking phases and continuous loads, such as weight
force or process forces.
● Low force ripple. The motor is suitable for high-precision applications.
To Next Page
Loading...
