Glossary
1FN3 linear motors
594 Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
The primary section is the electrically active component of a linear motor. It is usually the
moving component.
Unlike the → primary section, a secondary section is not electrically active. The → secondary
section track is composed of secondary sections.
The secondary section track is usually composed of multiple → secondary sections. It is
usually the immobile component of a linear motor.
The term "Stoker" describes the second of two motors in an axis fed by a shared power
module, which are therefore connected in parallel. → Parallel connection
In a tandem arrangement, → Master and → Stoker have the same phase sequence UVW.
The cable outlets of the motors are located on the same side.
To Next Page
Loading...
