Electrical installation
4.10 Other connections
Converter cabinet units
148 Operating Instructions, 07/2016, A5E03347396A
Figure 4-31 Communication Board Ethernet CBE20
The MAC address of the Ethernet interfaces is indicated on the upper side of the CBE20.
The plate is not visible when the module is installed.
Note
Note the MAC address
Remove the module from the option slot of the Control Unit and note down the MAC address
so that it is available during subsequent commissio
ning.
Damage or malfunctions to the Option Board by inserting and withdrawing in operation
Withdrawing and inserting Option Boards during operation can damage them or cause the
Option Boards to malfunction.
• Only withdraw or insert Option Boards when the Control Unit is in a no voltage state.
To Next Page
Loading...
