Siemens SINAMICS G150 - Page 205

Commissioning
5.3 Procedure for commissioning with STARTER
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
205
Figure 5-8 Complete setting the interface
⇒
Click
Continue >
to set up a drive unit in the project wizard.
Figure 5-9 Inserting the drive unit
⇒
Choose the following data from the list fields:
Device:
Sinamics
Type:
G150 CU320-2 DP or G150 CU320-2 PN with option K95
Version:
4.8
Target device address:
the corresponding bus address for the drive
The entry in
Name:
can be freely selected.
⇒
Click
Insert
The selected drive unit is displayed in a preview window in the project wizard.