Commissioning
5.5 First commissioning with the AOP30
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
245
Basic commissioning: Selecting the motor type and entering the motor data
You can select the motor standard and type
in the dialog screen.
The following is defined for the motor stan
d-
0: Line frequency 50 Hz, motor data in kW
, motor data in hp
The corresponding motor is selected for the
motor type.
data specified on the type
plate.
To navigate through the selection fields,
choose <F2> or <F3>.
To activate a selection, choose <F5>.
To change a parameter value, navigate to
the required selection field and activate with
<F5>.
The system displays anothe
r window in
Enter the value directly, or
Select the value from a list.
When you have finished entering the motor
data, choose "Continue" below the final p
a-
rameter value and activate with <F5>.
To Next Page
Loading...
