Siemens SINAMICS G150 - Page 59

Mechanical installation
3.3 Mounting
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
59
5. Attach the hood to the cabinet roof at the specified positions.
6. Attach the original M12
① roof screws from above at the rear side.
7. Attach the M6 screws and washers at the front side (sequence: screw, spring-lock
element, small washer, large washer)
② from below.
8. If the hood is very wide, insert additional screws in the center of the hood
(front and rear)
③.
Figure 3-19 View with opened cabinet door