Detailed Description
2.9 Assignment overview
PLC Basic Program Solution Line (P3 sl)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2-65
Overview of data blocks
DB no. Name Name Pa-
ckage
1 Reserved for Siemens BP
2-4 PLC-MELD PLC messages BP
5-8 Basic Program
9 NC-COMPILE Interface for NC compile cycles BP
10 NC INTERFACE Central NCK interface BP
11 Mode group 1 Interface mode group BP
12 Computer link and transport system interface
13-14 Reserved for basic program
15 Basic Program
16 PI Service definition
17 Version identifier
18 Reserved for basic program
19 HMI interface
20 PLC machine data
21 - 30 CHANNEL 1 ... n Interface NC channels BP
BP 31 - 61 AXIS 1 ... m Interfaces for axes/spindles
or free for user assignment
62 - 70 Free for user assignment
71 - 74 Tool management BP
75 - 76 M group decoding
77 Data block for MCP signals
78 - 80 Reserved for Siemens
81 - 999
1)
See below: ShopMill, ManualTurn
1000 – 1099 Reserved for Siemens
1100 -
upper limit
Free for user assignment
1)
The actual upper limit of the block number (DB) depends on the PLC CPU on which the selected
NCU is located. The data blocks of channels, axes/spindles and tool management functions that are
not activated may be assigned as desired by the user.
Note
The data blocks of channels, axes/spindles and tool management functions that are not
activated may be assigned as required by the user.
To Next Page
Loading...
