Siemens SINUMERIK 840DE SL - 2.1.1.2 Programmable maximum value (axis-specific); 2.1.2 Activation; 2.1.2.1 Parameterization; 2.1.3 Programming

Detailed Description
2.1 Acceleration without jerk limitation (BRISK/BRISKA) (channel-/axis-specific)
Acceleration (B2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2-3
2.1.1.2 Programmable maximum value (axis-specific)
Key statement
The maximum acceleration value can be set for each specific machine axis:
MD32300 $MA_MAX_AX_ACCEL (maximum axis acceleration)
The path parameters are calculated by the path planning component during preprocessing
so that the programmed maximum values of the machine axes that are of relevance for the
path are not exceeded.
Exceeding of maximum value
It is possible for the maximum value to be exceeded in connection with specific machining
situations (see Chapter: "Acceleration matching (ACC) and system variables
($AC_PATHACC) ).
2.1.2 Activation
2.1.2.1 Parameterization
Key statement
The maximum values are parameterized for specific axes using machine data:
MD32300 $MA_MAX_AX_ACCEL (maximum axis acceleration)
2.1.3 Programming
2.1.3.1 Path acceleration without jerk limitation (BRISK)
Syntax
BRISK
Functionality
The BRISK part-program instruction is used to select the "without jerk limitation" acceleration
profile for the purpose of path acceleration.
G group: 21
Effective: Modal