Siemens SINUMERIK 840DE SL - 5 Data Lists; 5.1 Machine data; 5.1.1 NC-specific machine data; 5.1.2 Channelspecific machine data

Axis Monitoring, Protection Zones (A3)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
5-1
Data Lists
5
5.1 5.1 Machine data
5.1.1 NC-specific machine data
Axis monitoring functions
None
Protection zones
Number Identifier: $MN_ Description
10604 WALIM_GEOAX_CHANGE_MODE Working area limitation during switchover of geometry
axes
10618 PROTAREA_GEOAX_CHANGE_MODE Protection zone for switchover of geo axes
18190 MM_NUM_PROTECT_AREA_NCK Number of files for machinerelated protection zones
5.1.2 Channelspecific machine data
Axis monitoring functions
Number Identifier: $MC_ Description
20150 GCODE_RESET_VALUES[n] Reset G groups
21020 WORKAREA_WITH_TOOL_RADIUS Allowance for tool radius with working area limitation