Siemens SINUMERIK 840DE SL - 5.2.2 Axis;spindle-specific setting data; 5.3 Signals; 5.3.1 Signals to axis;spindle

Data Lists
5.3 Signals
Spindles (S1)
5-4 Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
5.2.2 Axis/spindle-specific setting data
Number Identifier: $SA_ Description
43200 SPIND_S Specification of the spindle speed
43202 SPIND_CONSTCUT_S Specification of the constant cutting rate for the
master spindle
43210 SPIND_MIN_VELO_G25 Progr. Spindle speed limitation G25
43220 SPIND_MAX_VELO_G26 Progr. Spindle speed limitation G26
43230 SPIND_MAX_VELO_LIMS Progr. spindle speed limitation G96/G961
43240 M19_SPOS Spindle position for spindle positioning
with M19
43250 M19_SPOSMODE Spindle positioning approach mode for
spindle positioning with M19
43300 ASSIGN_FEED_PER_REF_SOURCE Rotational feedrate for positioning axes/spindles
5.3 5.3 Signals
5.3.1 Signals to axis/spindle
DB number Byte.Bit Description
31, ... 0 Feed override
31, ... 1.7 Override active
31, ... 1.6 Position measuring system 2
31, ... 1.5 Position measuring system 1
31, ... 1.4 Follow-up mode
31, ... 1.3 Axis/spindle disable
31, ... 2.2 Spindle reset/delete distance-to-go
31, ... 2.1 Servo enable
31, ... 3.6 Velocity/spindle speed limitation
31, ... 16.7 Delete S value
31, ... 16.5 Resynchronize spindle 2
31, ... 16.4 Resynchronize spindle 1
31, ... 16.3 Gear changed
31, ... 16.2-16.0 Actual gear step A to C
31, ... 17.6 Invert M3/M4
31, ... 17.5 Resynchronize spindle during positioning 2
31, ... 17.4 Resynchronize spindle during positioning 1
31, ... 18.7 Direction of rotation setpoint left