Siemens SINUMERIK 840DE SL - 5 Data Lists; 5.1 Machine data; 5.1.1 NC-specific machine data; 5.1.2 Channelspecific machine data

To Next Page

To Previous Page

Spindles (S1)

Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0

5-1

Data Lists

5.1 5.1 Machine data

5.1.1 NC-specific machine data

Number Identifier: $MN_ Description

10192 GEAR_CHANGE_WAIT_TIME Wait time for acknowledgment of a gear step change

during reorganization

10714 M_NO_FCT_EOP M function for spindle active after RESET

12060 OVR_SPIND_IS_GRAY_CODE Spindle override with Gray coding

12070 OVR_FACTOR_SPIND_SPEED Evaluation of spindle speed override switch

12080 OVR_REFERENCE_IS_PROG_FEED Override reference velocity

5.1.2 Channelspecific machine data

Number Identifier: $MC_ Description

20090 SPIND_DEF_MASTER_SPIND Initial setting for master spindle on channel

20092 SPIND_ASSIGN_TAB_ENABLE Enabling/disabling of spindle converter

20850 SPOS_TO_VDI Output of auxiliary function "M19" to the

VDI interface

22400 S_VALUES_ACTIVE_AFTER_RESET S function active after RESET

Other manuals for Siemens SINUMERIK 840DE SL