Detailed Description
2.3 Tool cutting edge
Tool Compensation (W1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
2-29
Tool compensation data for slotting saw type
The following compensation data (TOA data) can be specified for the slotting saw tool type
(type 700):
Geometry Wear Base
Length compensation
Length 1
$TC_DP3
$TC_DP12
$TC_DP21
mm
Length 2 $TC_DP4 $TC_DP13 $TC_DP22 mm
Length 3 $TC_DP5 $TC_DP14 $TC_DP23 mm
Saw blade compensation
Diameter d
$TC_DP6
$TC_DP15
mm
Slot width b $TC_DP7 $TC_DP16 mm
Projection k $TC_DP8 $TC_DP17 mm
7RRODGDSWHU
UHIHUHQFHSRLQW
EN /
G /
/
E
N
/
G
Fig. 2-3 Geometry of slotting saw (analogous to angle head cutter)
The width of the saw blade is accounted for with G40 to G42:
G40
No saw blade compensation
G41
Saw blade compensation left
G42
Saw blade compensation right
To Next Page
Loading...
