Glossary
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Glossary-21
Workpiece
Part to be created/machined by the machine tool.
Workpiece contour
Set contour of the → workpiece to be created or machined.
Workpiece coordinate system
The workpiece coordinate system has its starting point in the → workpiece zero. In machining
operations programmed in the workpiece coordinate system, the dimensions and directions
refer to this system.
Workpiece zero
The workpiece zero is the starting point for the → workpiece coordinate system. It is defined
in terms of distances to the → machine zero.
To Next Page
Loading...
