Siemens SINUMERIK ONE MCP 2400.4c Programming Manual

Other functions
Identifier Return
value
Parameter Explanation
1. 2. 3. 4. 5. 6.
STRINGIS INT:
Informa‐
tion
about the
string
STRING:
Name of
the ele‐
ment to
be
checked
Checks whether the
specified string is avail‐
able as element of the
NC programming lan‐
guage in the current
language scope.
ISVAR BOOL:
Variable
known
Yes/No
STRING:
Name of
the varia‐
ble
Checks whether the
transfer parameter con‐
tains a variable known
in the NC (machine da‐
ta, setting data, system
variable, general varia‐
bles such as GUDs).
GETVARTYP INT:
Data type
STRING:
Name of
the varia‐
ble
Determines the data
type of a system/user
variable
GETVARPHU INT:
Numeric
value of
the physi‐
cal unit
STRING:
Name of
the varia‐
ble
Determines the physi‐
cal unit of a system/
user variable
GETVARAP INT:
Protec‐
tion level
for ac‐
cess
STRING:
Name of
the varia‐
ble
STRING:
Type of
access
Determines the access
right to a system/user
variable
GETVARLIM INT:
Status
STRING:
Name of
the varia‐
ble
CHAR:
Specifies
which
limit val‐
ue
should
be read
out
VAR RE‐
AL:
Return of
the limit
value
Determines the lower/
upper limit value of a
system/user variable
GETVARDFT INT:
Status
STRING:
Name of
the varia‐
ble
VAR RE‐
AL
/
STRING/
FRAME:
Return of
the de‐
fault val‐
ue
INT:
Index to
the first
dimen‐
sion (op‐
tional)
INT:
Index to
the sec‐
ond di‐
mension
(optional)
INT:
Index to
the third
dimen‐
sion (op‐
tional)
Determines the default
value of a system/user
variable
COLLPAIR INT:
Check re‐
sult
STRING:
Name of
the 1st
protec‐
tion area
STRING:
Name of
the 2nd
protec‐
tion area
BOOL:
Alarm
suppres‐
sion (op‐
tional)
Checks whether part of
a collision pair
Tables
4.6 Predefined functions
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0 1301

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English