Siemens SINUMERIK User Manual

Programming and Operating Manual (Turning)
01/2017
177
Step 2
The groove is machined vertically to the infeed direction in one or several steps whereby each step, in turn, is divided
according to the infeed depth. From the second cut along the groove width onwards, the tool will retract by 1 mm before
each retraction.
Step 3
Machining of the flanks in one step if angles are programmed under ANG1 or ANG2. Infeed along the groove width is carried
out in several steps if the flank width is larger.

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe