Siemens SITRANS F - Stripchart Setup Menu Structure; Select Data

2-54
1010ENFM-3B
Section 2
2.8.1 SELECT DATA
The [Select Data] option list allows you to select a data function for the on-screen stripchart display. The
stripchart provides a data plot using the selected data units and time base. All data items except Valc and
Vaer use the span settings from the Data Span/Set/Cal menu. The following Data Items are available for
the Stripchart Display.
• Vfo .......................... (spanned flow) *default
• Vfo2 ........................ (spanned flow) additional
• Vfab ........................ (spanned unsigned flow magnitude)
• Ve ........................... (spanned energy rate)
• Ts, Tr ....................... (spanned supply and return temperatures
• Td ........................... (spanned temperature difference
• Vs ........................... (sonic velocity)
• CE ........................... (chiller efficiency)
• Valc ........................ (signal amplitude)
• Vaer ........................ (aeration/cavitation)
Stripchart Setup Select Data Vfo
Vfo2
Vfab
Ve
Ts
Tr
Td
CE
Vs
Valc
Vaer
Data Display Data Rate Units
Percent of Span
Time Base 1 Second
3 seconds
6 seconds
12 seconds
24 seconds
1 minute
3 minutes
6 minutes
12 minutes
24 minutes
1.2 hours
Stripchart Clear No
Yes
Ö
Ú
Ö
Ú
Ö
Ú
Ú
Ú
Ú
Ú
Ö
Ö
Ú
Ö
Ö
Ö
THE STRIPCHART SETUP MENU STRUCTURE