2-67
1010ENFM-3B
Section 2
2.11.1 MAIN DIAGNOSTICS SCREEN
This is the main Diagnostics Data screen. It provides menus that show Energy, Flow, Application, Liquid,
Site Setup information. The Test Facilities menu provides test/control functions to optimize operation,
analyze application conditions and to recover system operation.
2.11.2 ENERGY DATA MENU
This menu provides a “live” display of all energy related output data.
Energy Data
Application Data
Liquid Data
Site Setup Data
Test Facilities
Print Site Setup No
Date Site Created 04.18.01 13.24.01
Siemens 2 Channel [1] 1
Real-time energy-related data
Diagnostic Data
Energy Rate MBTU/H -0.0434
Energy Total MBTU 0.0000
Ts 74.77 F
Tr 31.70 F
Td 43.07 F
CE kW/ton 1.100
Energy ANCAL 0.000
Siemens 2 Channel [1] 1
Current Energy Rate and Units
Energy Data
Energy Data This menu shows live displays of energy rate, energy total, system temperature
data and a diagnostic energy ANCAL facility.
Flow Data This menu shows flow rate, total and alarm data; adjustable flow limits.
Application Info This menu shows current meter operating status.
Liquid Data This menu shows current Reynolds # and RTD temperature readings (if this
system includes optional RTD Temperature measurement capability).
Site Setup Data This menu shows current transducer setup data and signal status
Test Facilities This menu provides system test and recovery routines.
Print Site Setup This Menu cell allows you to send an ASCII dump of the current Site Data to a
RS-232 port device (e.g., a printer or laptop computer).
Date Site Created This menu cell shows date and time when the current site was created.
DIAGNOSTIC MAIN MENU DESCRIPTION
Ö
Ö
Ö
Diagnostic Data Print Site Setup Yes/No
Date Site Created: xx.xx.xx. xx.xx.xx
Ú
DIAGNOSTIC DATA MENU STRUCTURE (continued)
To Next Page
Loading...
