1-8
1010ENFM-3B
Section 1
Entering Alphanumeric Strings
An alphanumeric string is a series of numbers and letters; and also the Quotation Mark and the Pound
Sign symbol. You can also use a space. The meter uses these to identify a specific site setup or user-
modified table. The FUE1010EN keypad does not provide letter keys. However, when you access a
menu cell that requires an alphanumeric string answer, the menu cell right-hand column provides an
eight-character entry field. Press the <Right Arrow> to access the field. This selects the first character
position. Note that the prompt changes to a question mark (?). With the cursor at the first character
position, use the <Up or Down Arrows> to scroll through a single-character list. For example, as shown
below, an <Up Arrow> at the first character position produces the letter: upper-case [A]. Pressing the
<Right Arrow> moves the cursor to the second position.
Use the <Right and Left Arrows> to move through the character positions. If you wish to use numbers in
your string, you can type them directly from the keypad. After you finish selecting your string, press
<ENT> to register it.
1.7.3 THE METER TYPE MENU
This is the first list presented upon entering the Installation Menu. The meter automatically conditions
Installation Menu choices to suit the selected meter type. The following paragraphs introduce the avail-
able meter types for dual channel systems.
NOTE: On Single Channel systems, you do not get a choice of meter types, since this requires
two independent measurement channels. However, you can operate the single channel
with any optionally supplied measurement technology.
Siemens 2 Channel [1] Channel 1
Recall Site Setup No Sites
Channel Enable No
Create/Name Site ?A
Site Security Off
Delete Site Setup No Sites
Save/Rename Site
Right Arrow & Enter Creates a new Site
Channel/Path Setup
To Next Page
Loading...
