1-7
1010ENFM-3BSection 1
Multiple Select Option Lists
Certain option lists allow you to make more than one selection. For example, the Datalogger Data option
list allows you to select any or all of the available data items for your reports. As previously described, you
can use the <Up and Down Arrows> to move the cursor through the list. However, if you press <ENT> to
select an item, a plus sign (+) appears next to that item. The cursor remains within the option list so that
you can make other selections. To deselect a previously selected item, move the cursor next to that item
and then press <CLR>. You use the <Left Arrow> to leave a multiple select option list.
Entering Numeric Data
When a menu cell requires a numeric answer, press the <Right Arrow> to access a number entry field;
an equal sign (=) appears before the current entry. You can now use the number keys and the decimal
point key to type a new value. If applicable, you can use <+/-> key to change the mathematical sign of
the number. Press <ENT> to store the numeric data.
NOTE: All Numeric Data cells provide a four-function calculator via the keypad’s arithmetic func-
tion keys.
Siemens 2 Channel [1] 1
Select Liquid 20% Ethyl Glycl
Estimated Vs m/s 1600
Viscosity cS 2.00
Density S.G. 1.030
Access Liquid Option List
Liquid Class
Siemens 2 Channel [1] 1
Datalogger Mode +Site Id
Datalogger Data +Date
Log Time Interval +Time
Datalogger Events Flow
Display Datalogger +Average Flow
Raw Flow
Total
+Average Energy
Energy Rate
Select Datalogger Data
Liquid Class
Siemens 2 Channel [1] Channel 1
Select Pipe Class Manual Entry
Select Pipe Size N/A
Pipe OD (in) = 0.500
Pipe Material Steel Flow
Wall Thickness 0.100
Liner Material None
Liner Thickness 0.000
Enter pipe Outer Diameter manually
Pipe Data
To Next Page
Loading...
