Silca Idea - Page 103

Copyright Silca 2004 99
Operating Manual - English IDEA
D IMENSION CHECK – CUTTING TEST – PUMP KEYS
To check the machine’s precision, proceed as follows :
Choose “2 Insert cuts” from the main menu and press ENTER .
Choose SSN = 24 and press ENTER.
Enter the depth for bit 1 as in the example:
Press ENTER
Fit the key blank into the E3 adapter and follow the instructions in the user’s manual, then press START.
Press STOP, remove the key and use a centesimal gauge to measure it.
Fig. 126
0 - Copy from Original
1 - Decode and Copy
2 - Insert cuts
3 - Queue from PC >>
SSN = 24 (Cut)
Make =
= MOTTURA
MT2 - MT3 - MT4
Bit 1 (Symm. F-R)
#.......#
Possible depths
1234567# (1)
Bit 1 (Symm. F-R)
#4441444#
Possible depths
123456# (6)
SSN: 24 M1 Brass
Clamp.: S1 – K1 Stop: 3
Cutt.: 1.25 Adapt.: E3
Pcs. 1 / 1 (START)
Cutting in progress
Copy: 1 of: 1
Bit 1
Copy 1 of 1
finished
More copies?
No=STOP Yes=ENTER
-
Y
+
- X+
9,50 mm
4,40 mm
2,80 mm
(Y)
(X1)
(X)