Silca Idea - Page 51

Copyright Silca 2004 47
Operating Manual - English IDEA
Choosing an adapter for READING
Place the original key on the drawing, using the Rear Stop as a reference; the bit should enter the highlighted zone.
TYPE OF KEYS
Stem diameter min. 5 mm - max. 7 mm
Collar diameter max. 9 mm
Bit length in reading max. 40 mm
Bit height max. 17 mm / 19,5 mm
Distance from stop to bit min. 6 mm
Head width max. 30 mm
Adapter G
24
Max. 85
19.5
17
Jaws A - G
(example: Silca key ref. 6M24)
Rear Stop
Adapter F
Adapter E
Max. 75
Max. 65
19.5 19.5
24
17
17
6
Max. 30
Jaws A - F
Jaws A - E
(example: Silca key ref. 6M14)
(example: Silca key ref. 6FT12)
Rear Stop
Rear Stop