4100ES-S1 Programming Guide Document: LT0400
System Overview
2-2
2.1 General Description
The 4100ES-S1 is a pre-packaged configuration of the well-established 4100ES-S1 fire
alarm system. It is aimed at smaller applications requiring one to four loops of SIMPLEX
addressable devices with status and control for up to 64 zones.
The 4100ES-S1 is available from stock, along with a range of expansion cards and modules,
making the 4100ES-S1 an off-the-shelf solution.
4100ES-S1 retains the standard 4100ES-S1 features, such as: enhanced CPU with dual
configuration programs, convenient service port access via IP connection, Install Mode, and
module level earth fault search to locate and isolate faults to assist installation and service.
A Compact Flash module stores the history of updates allowing simple “roll-back” to an older
configuration, as well as general storage for other plans and documents.
It is fully compatible with all existing 4100, 4100U and 4100ES-S1 networks and all 4100U
modules.
Note:
Larger or more complex 4100ES-S1 systems are custom configured and constructed, using
a range of cabinet sizes and multiple cabinets if needed. While this manual does not cover
the many customization options, the programming principles remain the same and
4100ES-S1 program templates can also be used as a starting point for large systems.
To Next Page
Loading...
Need help?
General
