Document: LT0400 4100ES-S1 Programming Guide
Adding Expansion Modules
8.7 Adding 4100-0302/1290 24 Point Graphic Interface
The 4100-0302 24 Point Graphic Interface provides 24 points that can be configured as
inputs or outputs, with no restrictions on the point’s allocation as input or output.
To add the 4100--0302 24 Point Graphic Interface to the panel:
Select the HARDWARE Tab.
Expand the Unit 0, ‘Box 1’ and
‘Bay 2’.
Click on the “+” sign beside the
LEGACY ANNUNCIATOR CARDS
option on the Available Hardware
window.
Drag and drop the 4100-0302/1290
24 Point Graphic Interface Icon
over to the Bay 2 icon.
The card will be added to the panel
configuration.
Double click on the card and in the
Properties Tab, select the card’s address
and enter in the Card Custom Label: text
box, a descriptive label.
Click the Point Editing tab and add/edit
the points’ device types, point types and
Custom Labels. Record the point
addresses, as they are used within user
defined Custom Control equations.
To Next Page
Loading...
Need help?
General
