4100ES-S1 Programming Guide Document: LT0400
Building and Downloading the Configuration
11-4
click on the option containing the ES Programmer. A list of options appears. Click on IP
File Transfer.
When the start-up procedures have been completed the File Transfer utility appears.
11.4 IP Communication Parameter Settings
Click on the Settings button near the top of the IP File Transfer Window to access the
Settings Window.
The Settings window shows the IP address being used for the 4100ES-S1 panel and allows
you to change it, but this is hardly ever necessary.
Click on OK to confirm your selection or Cancel to discard any change you made.
11.5 IP File Transfer
11.5.1 Download Tab
By default, the IP File Transfer window will open to the Download tab.
To Next Page
Loading...
Need help?
General
