1-4
Figure 1-3. Log On Services Window
2. Enter your number in the box labeled Name/Number and press Enter.
The cursor then advances to the Passcode box.
3. At the passcode box, enter your passcode and press Enter.
4. After pressing Enter, press OK at the bottom of the Log On Services
Window.
If the name/number and passcode are recognized by the system, the screen
changes to show the current operator name, operator number, and access level.
Pressing OK again displays the Main Menu.
5. Press OK at the bottom of the Log On Services Window one more time to
close the window and you are logged onto the system.
If the name/number and passcode are not recognized by the system, you receive
an error message and a Return button is displayed. If you press on the Return
button, you are returned to the Log On Services Screen and you can attempt to
log on again.
Logging On to the System, Continued
Procedure (Continued)
To Next Page
Loading...
Need help?
General
