3-43
The Utility Control function provides access to pre-programmed control
functions. These pre-programmed control functions control such operations as:
Lighting Control, Water flow Control, Air Handling Unit Control, etc.
To access the Utility Control Functions, do the following:
1. Press the Utility Control Button (Figure 3-48) located on the Main Menu.
Figure 3-48. Utility Control Button
2. After you press the Utility Control Button, the Utility Control Menu (Figure
3-49) is displayed.
Figure 3-49. Utility Control Menu
Continued on next page
Utility Control
Introduction
Accessing the Utility Control
Functions
To Next Page
Loading...
