Simplex 4120 - Figure 3-7. Active List Screen Changed to Allow Enabling or Disabling a Point; Figure 3-8. Point Enable Operation Window

3-7
Figure 3-7. Active List Screen changed to allow enabling or
disabling a point
2. At this screen, select the point you want and press Enable Point.
When you press Enable Point, the Point Enable Operation Window is displayed.
Figure 3-8. Point Enable Operation Window
3. At the Point Enable Operation Window, press Enable.
The Enable Operation Window is displayed and shows a count down timer that
indicates the time remaining before the point is enabled.
Continued on next page
Viewing Active Lists, Continued
Disabling/Enabling Points
(Continued)
firealarmresources.com