3-28
Figure 3-33. Status and Control Menu
From the Status And Control Menu, you can access the functions as needed. The
sections that follow explain how to use the available functions.
To view the point status do the following:
1. At the Status and Control Menu (Figure 3-33), highlight the point you want to
view and press the Change Status Button.
2. After you press the Change Status Button, the Point Status Display Window
(Figure 3-34) is displayed showing information about the point you
highlighted.
Continued on next page
Viewing the Status of Points and Controlling Point Operations,
Continued
Accessing the Status and
Control Functions (Continued)
Viewing the Point Status
To Next Page
Loading...
