3-18
The sections that follow discuss these functions:
• Returning to the Main Menu
• Exiting from the NPU
• Selecting a New Job
• Restarting the unit
• Running Network Diagnostics
• Calibrating the touchscreen
When you press Main Menu, you are immediately returned to the Main Menu.
The Exit function allows you to exit from the NPU. To exit from the NPU, do
the following:
1. Press Exit. A window appears asking, "Are you sure you want to exit?"
2. Press Exit and you are returned to the Windows Operating System. If you
decide you do not want to exit, press Cancel and you are returned to the
Service Menu.
The Job Selection function allows you to select a new job and make it the
currently running job. It also allows you to change to a new network and view
the configured jobs in that network. To select a new job, do the following:
1. At the Service Menu, press Job Selection.
2. After you press Job Selection, the Job Selection Window (Figure 3-22) is
displayed.
Continued on next page
Servicing the System, Continued
Procedure (Continued)
Returning to the Main Menu
Exiting From the NPU
Selecting a New Job
To Next Page
Loading...
Need help?
General
