3-8
Figure 3-9. Enable Operation Window with Count Down Timer
4. To enable the point immediately, press Enable Immediate.
After you press Enable Immediate, an information window is displayed
indicating that the enable operation is complete.
Figure 3-10. Enable Operation Completed Information Window
At this window, press OK and the enable operation is completed.
To disable a point on the active list do the following:
1. At the Active List Screen, press Disable/Enable at the bottom of the screen.
The option buttons at the bottom of the screen change to show Return,
Disable Point, and Enable Point as shown in (Figure 3-7).
2. At this screen, select the point you want and press Disable Point.
When you press Disable Point, the Point Disable Operation Window is
displayed.
Continued on next page
Viewing Active Lists, Continued
Disabling/Enabling Points
(Continued)
To Next Page
Loading...
Need help?
General
