EasyManua.ls Logo

SM ALFOplus2 - RF Band;High Power Versions; Ethernet Functionalities

SM ALFOplus2
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 MN.00356.E - 003
5.7.2 RF band/High Power versions
ALFOplus2 is available in several RF band with various Tx/Rx spacing and two Tx Power profiles, standard
and High Power.
Standard power:
-18 GHz
-23 GHz
-25 GHz
-28 GHz
-38 GHz
-42 GHz
•High power:
- 6/7/8 GHz
-11 GHz
-13/15 GHz.
5.8 ETHERNET FUNCTIONALITIES
ALFOplus2 is compliant with MEF9 for service functionality and MEF14 for service performance and can be
used to implement standardized Ethernet services such as E-Line, E-LAN and E-Tree providing quality of
service (QoS), scalability and reliability. Each service could be created in transparent mode or in virtual
mode sharing radio link resources between different services managing VLAN 802.1q tags.
Supported Ethernet switch functionalities are following:
12k jumbo frame support
802.3x Flow Control
Ethernet Layer 2 transparent switching
Configurable MTU
MAC learning/aging
802.1Q full range VLAN support and independent forwarding
VLAN tagging and QinQ support (IEEE802.1ad) and VLAN rewriting
Multiple S-VLAN support per port
PCP bits copy from C-VLAN to S-VLAN
Configurable queue depth
Traffic classification on 802.1p, DSCP, EXP bits and VLAN
Flexible scheduling by tail drop or WRED (8 queues)
Strict priority, RR and WDRR flexible scheduling support
Ingress policing (CIR/EIR)
Egress shaping based on configured classification
Link Loss forwarding
Ethernet line protection (ELP)
IEEE OAM 802.1ag OAM
IEEE OAM 802.3ah (Data link OAM)

Table of Contents