SM ALFOplus2 - Out of Band: MNGT VLAN Creation (WEBLCT); Out of Band: IP Address (WEBLCT)

MN.00356.E - 003 71
- Remote Element List
-Restart
•CLI
- MNGT VLAN creation (Vid=1), IP address, Agent IP Address and default gateway.
10.2.1 Out of band: MNGT VLAN creation (WEBLCT)
For the Out of band example, involved ports are: MNGT, LAN2 and TRX. Among them MNGT and LAN2 are
untagged.
In WEBLCT select Base Band menu, Ethernet and VLAN:
• select Static VLANs card and click Add: Static VLAN Configuration window is open
• set VLAN ID, VLAN name, Member Ports (MNGT gi0/4, LAN2 gi0/9, Radio gi0/3), Untagged Ports
(MNGT gi0/4, LAN2 gi0/9) and Ether Type used (0x8100)
• click Apply and confirm
• now VLAN 1 can be used for Out of Band manag.
Fig.41 - MNGT VLAN creation
10.2.2 Out of band: IP Address (WEBLCT)
In WEBLCT select Base Band menu, DCN and MNGT Port Configuration.
• Set IP Address, Net Mask, Default Gateway and VLAN ID (Default OoB Vid =1)
• Click Apply and Confirm, click Store and Confirm
Fig.42 - IP address setting