SM ALFOplus2 - Out of Band - Restart; Out of Band: IP Address, MNGT VLAN, Agent IP and Default Gateway (CLI)

MN.00356.E - 003 73
Fig.44 - Remote element list
10.2.5 Out of band - Restart
Into WebLCT at position:
• Equipment menu
• Main - Equipment properties, in General Info
• Press the button System Restart and Confirm.
10.2.6 Out of band: IP Address, MNGT VLAN, Agent IP and Default Gate-
way (CLI)
This is the CLI script for the setup of Out of Band Management. Add the script after SM-OS#.
#Customer bridge
c t
bridge-mode customer
#set MTU=2048byte
system MTU 2048
#set VLAN 1
vlan 1
ports gi0/9 gi0/4 gi0/3 untagged gi0/9 gi0/4 name Out_of_band
exit
#Set Interface VLAN 1 for Out of Band management
default ip vlan id 1
#Set new Ip address/SubnetMask
default ip address 192.168.79.170 subnet-mask 255.255.255.0
#Set default gateway