SM ALFOplus2 - In Band Management

74 MN.00356.E - 003
default gateway route 192.168.79.1
#Configure management interfaces
interface gigabitethernet 0/4;
switchport priority default 7; switchport ingress-filter; no shutdown
exit
interface gigabitethernet 0/9;
switchport pvid 1; switchport priority default 7; switchport ingress-filter; no shutdown
exit
interface gigabitethernet 0/3
shutdown; no negotiation; speed 2500; no shutdown
end
reload.
10.3 IN BAND MANAGEMENT
For the In Band example, the ports involved are: MNGT, LAN1, LAN2 and TRX. MNGT is untagged.
In Band management configuration can be set using WEBLCT or using CLI.
WEBLCT
• MNGT VLAN creation
• MNGT (gi0/4) IP address and InBand management
• Agent IP Address
• Remote Element List
•Restart
CLI
MNGT VLAN creation, MNGT (gi0/4) IP address and Agent IP Address, InBand Vid and default gateway.
10.3.1 In band: MNGT VLAN creation (WEBLCT)
In WEBLCT select Base Band menu, Ethernet and VLAN.
• Select Static VLANs card and click Add: Static VLAN Configuration window is open
• Set VLAN ID (Vid=127), VLAN name, Member Ports, Untagged Ports (among the previous) and
Ether Type used
• Click Apply and confirm
• Now the new VLAN can be used for management.